Kodak EasyShare V1253 zoom digital camera — User's guide

Table of Contents > Taking pictures/videos > Using the self-timer

---

2 Taking pictures/videos

Using the self-timer

Use the self-timer when you want to be included in a picture, or to ensure a steady Shutter button press. Place the camera on a tripod or flat surface.

		1. In any Still mode, press the Menu button.
		2. Press to highlight Self-Timer, then press OK.
		3. Press to highlight: 10 seconds - A picture is taken after a 10-second delay (so you have time to get into the scene). 2 seconds - A picture is taken after a 2-second delay (for a steady, auto-shutter release on a tripod). 2 shot - The first picture is taken after a 10-second delay. A second picture is taken 8 seconds later.
		4. Press OK, then the Menu button.
		5. Compose the scene.
		6. Press the Shutter button halfway, then completely down. The camera takes the picture/pictures after the delay. NOTE: In Panoramic modes (Taking panoramic pictures), only the 2- and 10-second options are available.

Use the same procedure to take a video, but:

• Press the Video mode button .

• Press the Shutter button completely down.

NOTE:

The video stops when no storage space remains. Only the 2- and 10-second options are available in video mode.

Previous Next