Kodak EasyShare ZD710 zoom digital camera — User's guide


Table of Contents > Doing more with your camera > Using the Setup menu

4 Doing more with your camera

Using the Setup menu

Use Setup to customize your camera settings.

  1. In any mode, press the Menu button.

  2. Press to highlight Setup , then press OK.

  3. Press to highlight a setting, then press OK.

  4. Choose an option, then press OK.

  5. Press the Menu button to exit.

Press Menu, to highlight Setup, to access settings, then OK. Options

Image Storage

Choose a storage location for pictures and videos.

Auto (default) - the camera uses the card if one is in the camera. If not, the camera uses internal memory.

Internal Memory - the camera always uses internal memory, even if a card is installed.

Set Album

Choose Album names.

You can apply different Set Album choices to videos and to pictures.

On

Off (default)

Pre-select album names before you take pictures or videos. Then, all the pictures or videos you take are tagged with those album names. (See Pre-tagging for album names.)

Capture Frame Grid

Turn framing grid on or off.

On

Off (default)

Quickview

Change Quickview default.

On (default)

Off

Advanced Digital Zoom

Choose how digital zoom is employed.

Continuous - no pause between optical and digital zoom.

Pause - after reaching the optical zoom limit, the zoom button must be released, then activated again to begin digital zoom.

None (default) - digital zoom is disabled.

Orientation Sensor

Orient pictures so that they are displayed with the correct side up.

On (default)

Off

Camera Sounds

Choose a theme, or choose sounds for individual camera functions.

Default

Sci-fi

Fun

Music

None

Sound Volume

Off

High

Medium (default)

Low

Date & Time

See Setting the language and date/time.

Auto Power Off

Choose amount of inactivity time until camera turns off.

10 minutes

5 minutes

3 minutes (default)

1 minute

Video Out

Choose the regional setting that lets you connect the camera to a television or other external device.

NTSC (default) - used in North America and Japan; most common format.

PAL - used in Europe and China.

Language

Choose from available languages.

Reset Camera

Resets all settings to factory defaults.

Format

CAUTION:
Formatting a card deletes all (including protected) pictures/videos. Formatting internal memory deletes all pictures/videos, email addresses, album names, and favorites.

Memory Card - deletes everything on the card; formats the card.

Cancel - exits without making a change.

Internal Memory - deletes everything in internal memory including email addresses, album names, and favorites; formats the internal memory.

About

View camera information, including firmware version.



Previous Next