Kodak EasyShare M1033/M2008 digital camera — User's guide
Table of Contents > Doing more with your camera > Taking panoramic pictures
4 Doing more with your camera
Taking panoramic pictures
Use panorama to "stitch" up to 3 pictures into a panoramic scene.
NOTE: | For best results, use a tripod. Only the panoramic picture is saved; individual pictures are not. (Exposure and white balance are set with the first picture. The flash is set to Off.) |
-
Press the Mode button.
-
Press to highlight SCN, then press the OK button.
-
Press to highlight Panorama Left-Right or Panorama Right-Left (depending on the direction you want to pan), then press the OK button.
-
Take the first picture.
After a quickview, the LCD displays the liveview and an "overlay" from the first picture.
-
Compose the second picture. Make the overlay from the first picture cover the same portion in the new picture. (You can press the Delete button to re-take a picture.)
-
If you are taking only 2 pictures, press the OK button to stitch them together.
After you take 3 pictures, the pictures are automatically stitched together.
NOTE: | To use the self-timer 10-second or 2-second setting, see Using the self-timer. |
Previous Next