KODAK EASYSHARE C1013/CD1013 digital camera — User guide


Table of Contents > Doing more with your camera > Using the zoom button

1 Doing more with your camera

Using the zoom button

Use optical zoom to get up to 3X closer to your subject.


  1. Use the LCD to frame your subject.

  2. Press T (Telephoto) to zoom in. Press W (Wide Angle) to zoom out.

The zoom indicator shows zoom status.

  3. Take the picture or video.

NOTE: To get a focused picture every time, remember:
  • Always use the auto focus framing marks.

  • If you are using no zoom (1X, wide angle), you can be as close as 28 in. (70 cm) to your subject.

  • As you zoom, you need to move further from your subject.


To use digital zoom in any Still mode:

Press T (Telephoto) to the maximum optical zoom limit. Release the button, then press it again.

NOTE: You may notice decreased image quality when using digital zoom. The slider on the zoom indicator turns red when the picture quality reaches the limit for an acceptable 4 x 6-in. (10 x 15 cm) print.



Previous Next