Kodak EasyShare M1093 IS digital camera — User guide


Table of Contents > Doing more with your camera > Using the self-timer

1 Doing more with your camera

Using the self-timer

Use the self-timer when you want to be included in a picture, or to ensure a steady Shutter button press. Place the camera on a tripod or flat surface.


  1. In any picture-taking mode, press until the desired self-timer icon appears for:

10 seconds - A picture is taken after a 10-second delay (so you have time to get into the scene).

2 seconds - A picture is taken after a 2-second delay (for a steady, shutter release on a tripod).

2 shot - The first picture is taken after a 10-second delay. A second picture is taken 8 seconds later.

  2. Compose the scene. Press the Shutter button halfway, then completely down.

The camera takes the picture/pictures after the delay.

Use the same procedure to take a 2- or 10-second self-timer video, but press the Shutter button completely down.

Using burst

Use burst to take up to 3 pictures in quick succession.

  1. In any picture-taking mode, repeatedly press until the Burst icon appears at the top of the LCD.

  2. Press the Shutter button halfway to focus and set exposure. Press the Shutter button completely down and hold it to take pictures.



Previous Next