Kodak EasyShare digital photo frame — P520/P720/P820

Table of Contents > Doing more > Upgrading your firmware

---

3 Doing more

Upgrading your firmware

Firmware is the software that runs on your frame. To check for the latest version, visit www.kodak.com/go/digitalframedownloads.

Download the firmware to your computer, then upgrade your frame:

1. On your computer, go to www.kodak.com/go/digitalframedownloads.

2. Follow the screen directions to download the frame firmware to your computer.

3. Copy the IMG file to the root directory of a memory card or USB flash drive, then insert into the frame.

   The frame recognizes the upgrade file on the inserted device and makes the Firmware Upgrade option available in the Settings menus.
   
   

4. Tap (Home), then (Settings).

5. Highlight Firmware Upgrade, then tap OK to begin the upgrade.

   IMPORTANT:

   Do not turn off the frame or remove the memory card or USB flash drive during the upgrade!

   
   When the upgrade is complete, your frame automatically restarts. If it doesn't, press the power button to turn the frame off, wait a few seconds, then press it again to turn the frame back on.
   
   

Previous Next