Kodak ESP 9 All-in-One Printer — User Guide


Table of Contents > Maintaining Your Printer > Cleaning the scanner lid

9 Maintaining Your Printer

Cleaning the scanner lid

Minor debris can accumulate on the document backing located underneath the scanner lid of the Kodak printer.

WARNING: Do not use paper-based wipes, as these might scratch the underside of the scanner lid. Do not use harsh or abrasive cleaners or organic solvents on the printer or any of its parts.

  1. Unplug the printer and raise the lid.



  2. Clean the underside with a soft cloth or sponge, slightly moistened with a mild soap and warm water.

  3. Wipe the underside gently to loosen debris. Do not scrub.

  4. Dry the underside with a chamois or soft cloth.

  5. If further cleaning is needed, repeat the previous steps using isopropyl (rubbing) alcohol, and wipe the underside thoroughly with a damp cloth to remove any residual alcohol.

  6. When finished cleaning, plug in the printer.



Previous Next