KODAK EASYSHARE C140 Digital Camera — Extended user guide


Table of Contents > Working with pictures/videos > Playing a slide show

3 Working with pictures/videos

Playing a slide show

Use Slide Show to display your pictures/videos on the LCD. You can play all pictures/videos, or select pictures to include in the slide show.

Make a slide show

  1. Press the Review button. Select 2-100 pictures (see Selecting multiple pictures/videos).

  2. Press the Menu button, then to highlight the Review tab. Highlight Slide Show, then press OK.

  3. Press to highlight Preview Show, then press OK.

    Each picture/video is displayed once. To interrupt the slide show, press OK.

IMPORTANT: Your camera offers a built-in Help system. Getting help from your camera.

Play a slide show loop

  1. On the Slide Show menu, press to highlight Loop, then press OK.

  2. Press to highlight On, then press OK.

  3. Press to highlight Preview Show, then press OK.

    The slide show repeats until you press OK or until the batteries are exhausted.

Displaying pictures/videos on a television

You can display pictures/videos on a television, computer monitor, or any device equipped with a video input. To connect the camera directly to a television, use an A/V cable (may be sold separately).

Purchase accessories

www.kodak.com/go/c140accessories


NOTE: Ensure that the Video Out setting (NTSC or PAL) is correct ( ). The slide show stops if you connect or disconnect the cable while the slide show is running. (Image quality on a television screen may not be as good as on a computer monitor or when printed.) Sound cannot be played on the camera. Sound is heard after the video is transferred to your computer.



Previous Next