KODAK EASYSHARE Digital Frame — S730

Table of Contents > Changing settings and more > Upgrading your firmware (recommended)

---

4 Changing settings and more

Upgrading your firmware (recommended)

Firmware is the software that runs on your frame. To check for the latest version, visit www.kodak.com/go/digitalframedownloads.

Download the firmware to your computer, then upgrade your frame:

1. On your computer, go to www.kodak.com/go/digitalframedownloads.

2. Follow the screen directions to download the frame firmware to your computer.

3. Copy the IMG file to the root directory (not in a folder or subfolder) of a memory card or USB flash drive, then insert into the frame.

4. Tap (Menu), then tap (Settings).

5. Highlight Firmware Upgrade, then tap OK to begin the upgrade.

   The upgrade may take up to 5 minutes.
   
   When the upgrade is complete, your frame automatically restarts.
   
   

   CAUTION: Do not turn off the frame or remove the memory card or USB flash drive until the upgrade is complete and the frame has restarted.

Previous Next