Kodak ESP 5 All-in-One Printer — User Guide


Table of Contents > Viewing and Printing Photos > Viewing photos

4 Viewing and Printing Photos

Viewing photos

Insert one of the following plug-and-play devices into the appropriate slot:

NOTE: Always use the USB port on the front of the printer. To avoid an error, use only one slot or port at a time.

Device Type Printer Slot

Memory Card

Memory Card Reader

Portable Storage Drive

USB port

Digital Camera

USB port

Kodak Bluetooth dongle

USB port

NOTE: If Tagged Image Printing is enabled on this printer (see Printer Setting Options), it detects a Digital Print Order Format (DPOF) file when you insert a memory card. The printer screen prompts you to verify that you want to print tagged images. See Printing tagged images.

Most memory cards will work with this printer. When you insert a memory card, connect a camera, or portable flash drive to the printer, the last photo taken is displayed first.

CAUTION:
Do not insert more than one memory device, such as a portable storage drive (USB) or memory card, into the printer at a time. An error message will display when a second device is connected to your printer unless you are already printing a job. The error message will only display after the print job is complete.  
NOTE: Photos stored on a PictBridge camera are displayed on the camera screen.



Previous Next