Kodak ESP 5 All-in-One Printer — User Guide
Table of Contents > Maintaining Your Printer > Monitoring and adjusting the printer's performance
7 Maintaining Your Printer
Monitoring and adjusting the printer's performance
From the control panel, you can perform many tasks to keep this printer in good working order. For example, you can check the status of the printer's inkjet nozzle to ensure high-quality prints. Kodak recommends that you run a nozzle check if you are experiencing changes in image quality. You can also use the Printhead Alignment function if you see degradation in print quality.
-
Make sure that there are 5–10 sheets of plain paper loaded in the bottom paper tray.
-
Press Menu to display the main menu.
-
Press until Maintenance is selected.
-
As needed, press until the desired option is selected.
-
Press OK.
-
Follow the prompts in the display screen to initiate or cancel the task.
|
Tip: A printhead alignment and a check of the inkjet nozzle can also be initiated from the Home Center software. Windows: Open the Home Center Help panel by clicking Help on the Home Center window, as needed. Click Maintenance, and then click Nozzle Check or Printhead Alignment. Macintosh: Open the Home Center window and click Maintenance, and then click Nozzle Correction or Printhead Alignment |
Maintenance Options
The available maintenance options are shown in the table below:
Menu Options | Select |
---|---|
OK |
|
Nozzle Check |
OK |
Printhead Alignment |
OK |
OK |
|
OK |
|
OK |
|
Format Memory Card |
OK |
|
WARNING: Formatting will erase all the data on a memory card. |
Previous Next