Kodak ESP 3 All-in-One Printer — User Guide
Table of Contents > Handling and Loading Paper > Loading an Original
3 Handling and Loading Paper
Loading an Original
When copying or scanning using the Kodak ESP 3 All-in-One printer, place your original directly on the scanner glass.
-
Lift the lid and place your original face down on the right front corner of the scanner glass. Notice the silver arrow pointing to the right front corner.
-
Press Copy or Scan on the control panel.
-
To copy or scan oversized originals, completely remove the lid from the printer. The printer functions normally with the lid removed.
To remove the lid
To remove the lid, lift the lid to the open position, grasp the sides of the lid, and then gently pull the lid upward.
![](/support/jpg/en/manuals/GLB_en_urg_01062_images/autourg01062003ID2221114.jpg)
To replace the lid
To replace the lid, insert the tabs on the hinge back into the appropriate slots
Previous Next