Kodak ESP 3 All-in-One Printer — User Guide

Table of Contents > Maintenance > Cleaning the scanner glass

7 Maintenance

Cleaning the scanner glass

To ensure that your copies and scans remain clear, keep the Kodak printer's scanner glass and lid backing clean and dust the exterior.

WARNING: Do not use abrasives, acetone, benzene, or carbon tetrachloride on the glass, as they can damage it. Do not place or spray liquid directly on the glass. The liquid might seep under the glass and damage the device.

  1. Unplug the printer and raise the lid.  

  2. Clean the glass with a soft cloth or sponge slightly moistened with a nonabrasive glass cleaner.

  3. Dry the glass with a lint-free cloth.

  4. When finished cleaning, plug in the printer.

Previous Next