KODAK ESP 5200 Series All-in-One Printer — Extended User Guide
Table of Contents > Printer Overview > Configuring printer settings
1 Printer Overview
Configuring printer settings
To set or change basic printer settings:
-
Press Home.
-
Press to select Printer Settings, then press OK.
-
Press to select one of the following settings:
-
-
Press OK, then press to select Year, Month, Day, Hour, or Minute. Press or to change the values; press OK when you are done.
NOTE: You can also synchronize the printer date and time to your computer using Home Center Software.
-
-
-
To conserve energy, the printer will enter a reduced power (sleep) mode automatically after 1 hour. You can adjust the delay time (in 0.5 hour increments) up to 4 hours. Increasing the delay time may result in reduced energy savings.
Press to change the time to energy-saving sleep mode (select from 1 to 4 hours in 0.5 hour increments).
-
-
Tagged Images Printing (see Printing tagged pictures)
-
Press to select Off or On.
-
-
-
Press OK, press to select a language, then press OK.
-
-
-
Press OK, press to select a country or region, then press OK.
-
-
Reset All Settings (see Resetting factory defaults)
NOTE: Resetting factory defaults does not change the date and time, language, country/region, or network settings.
-
-
Press Back to return to the Main Menu.
Previous Next