KODAK ESP 5200 Series All-in-One Printer — Extended User Guide
Table of Contents > Networking Your Printer > Adding a wireless network connection to a USB-connected computer
2 Networking Your Printer
Adding a wireless network connection to a USB-connected computer
You can change the way you connect to your printer at any time.
Changing from USB to a wireless connection
To change the printer connection type from USB to a wireless (Wi-Fi) network:
If your printer is connected to a computer with WINDOWS OS:
-
Unplug the USB cable from your printer and computer.
-
On the printer control panel, press Home.
-
Press to select Network Settings, then press OK.
-
Press to select View Network Configuration, press OK, then confirm you have a non-zero IP address.
-
If you have not already done so, connect your printer to your wireless network. See Connecting to a wireless network.
-
On your computer, disable any firewall you have installed until you have successfully completed the installation. For more information on firewalls, go to www.kodak.com/go/inkjetnetworking.
-
Select Start > All Programs > Kodak > Kodak Printer Network Setup Utility.
-
If your wireless all-in-one printer (example: KodakESP5200+1133) is not listed:
-
Select No, my printer is not listed, then click Next.
-
Select your printer from the list.
-
Select Network - Wireless/WiFi, then click Next. When your printer is detected, driver installation begins.
-
-
If your wireless all-in-one printer (example: KodakESP5200+1133) is listed:
-
Highlight the all-in-one printer that is connected to your network.
-
Select Yes, my printer is listed, then click Next. When your printer is detected, driver installation begins.
-
-
-
When driver installation is complete, click Done.
The printer with a wireless connection is listed as the name of the printer plus a number (for example, KodakESP5200+1133).
If your printer is connected to a computer with MAC OS:
-
Unplug the USB cable from your printer and computer.
-
On the printer control panel, press Home.
-
Press to select Network Settings, then press OK.
-
Press to select View Network Configuration, press OK, then confirm you have an IP address.
-
Select Apple > System Preferences.
-
Under Hardware, select Print & Fax.
-
In the Print & Fax dialog box, click +.
-
Select your printer from the list, then click Add.
The printer with a wireless connection is listed as the name of the printer plus a number (for example, KodakESP5200+1133).
Previous Next