KODAK ESP 5200 Series All-in-One Printer — Extended User Guide
Table of Contents > Maintaining Your Printer > Updating the software and printer firmware
7 Maintaining Your Printer
Updating the software and printer firmware
Using the latest software and firmware helps ensure optimal performance of your printer.
NOTE: | Firmware is the software that runs on your printer. |
When you open Home Center Software on a computer with WINDOWS OS, the software automatically checks for software and firmware updates. On a computer with MAC OS, you must check manually for updates.
Use the following procedure to update manually.
Updating if your printer is connected to a computer with WINDOWS OS
To update the software:
-
Make sure that your computer is connected to the Internet.
-
Open Home Center Software.
-
Click Tools and Documentation.
-
Under Web Links, click Check for Software Updates to check whether software updates are available.
-
If there are updates, click Next and follow the on-screen instructions.
To update the printer firmware:
-
Make sure that your computer is connected to the Internet.
-
Connect the printer to the computer with a USB cable or wirelessly (if not currently connected).
-
Open Home Center Software, and make sure that KODAK ESP 5200 Series AiO - Connected appears in the lower left corner of the Home Center Software window.
-
Click Tools and Documentation.
-
Under Web Links, click Check for Printer (Firmware) Updates.
-
If there are updates, click Next and follow the on-screen instructions.
IMPORTANT: Do not turn off or unplug your printer or your computer during the update. Doing so may cause the printer to become inoperable.
Updating if your printer is connected to a computer with MAC OS
To update the software:
-
Make sure that your computer is connected to the Internet.
-
Open Home Center Software.
-
On the KODAK AiO Home Center menu, select Check for Updates.
-
If there are software updates, follow the on-screen instructions for updating your software.
To update the firmware:
-
Go to www.kodak.com/go/esp5250downloads or www.kodak.com/go/esp5210downloads.
-
Connect the printer to the computer with a USB cable or wirelessly (if not currently connected).
-
Select your operating system from the drop-down list.
-
Click Select in the Firmware box.
-
Read the instructions, click Download, then follow the on-screen instructions.
IMPORTANT: Do not turn off or unplug your printer or your computer during the update.
Previous Next