KODAK ESP Office 6100 Series All-in-One Printer — Extended User Guide
Table of Contents > Troubleshooting > Status lights
9 Troubleshooting
Status lights
There are two status lights on the printer: one indicates power, the other indicates Wi-Fi status.
Power status light
Power light | What it means |
---|---|
Off |
The printer is turned off.
The printer does not have power.
|
Blinking |
The printer is busy.
|
On |
The printer is ready. |
Wi-Fi status light
Wi-Fi status light | What it means |
---|---|
Off |
The Wi-Fi radio is either turned off or is turned on but not connected to a wireless network. |
Blinks continuously |
The Wi-Fi radio is turned on and the printer is searching for available wireless networks within range. |
Blinks intermittently |
The Wi-Fi radio is turned on and the printer cannot find any available wireless networks within range, or the Wi-Fi radio connection has been interrupted or is too weak to send signals. To find and connect to an available wireless network within range, press OK, turn the Wi-Fi radio off, and run the WiFi Setup Wizard (see Connecting to a wireless network using the WiFi Setup Wizard). |
On |
The Wi-Fi radio is turned on and there is a working connection between the printer and a wireless network. |
Previous Next