KODAK EASYSHARE C195 Digital Camera — Extended user guide

Table of Contents > Taking pictures/videos > Taking pictures

---

2 Taking pictures/videos

Taking pictures

		To get the best pictures:
		1. The camera turns on in Smart Capture mode. (If it's in a different mode, press the Mode button, then until the LCD displays Smart Capture , then press OK.)
		2. Compose the picture.
		3. Press the Shutter button halfway to focus and set exposure. When the framing marks turn green, press the Shutter button completely down.

Using the framing marks

		Framing marks indicate the camera focus area.
		1. Press the Shutter button halfway. If the camera is not focusing on the desired subject, release the Shutter button and recompose the scene.
		2. Press the Shutter button completely down to take the picture.

NOTE:

Framing marks do not appear in all modes. Multiple framing marks may appear when faces are detected.

Reviewing the picture/video just taken

After you take a picture/video, the LCD displays a quickview for approximately 5 seconds. (To exit the quickview sooner, press the Shutter button halfway.)

To review pictures/videos anytime, see Working with pictures/videos.

Previous Next