KODAK Mini HD Video Camera — Extended user guide
Table of Contents > Appendix > Care and maintenance
4 Appendix
Care and maintenance
-
Before inserting or removing a card, make sure your hands, the camera, and the card are completely dry.
-
If water has entered the camera, remove the card. Allow all components to air-dry for at least 24 hours before using the camera.
-
Wipe off dirt or sand from the door seals—debris could compromise the seal and cause a leak in water.
-
Do not subject the camera to temperatures lower than 0 (32°F) or higher than 40°C (104°F) for an extended time—the integrity of the seals may be compromised. Wait until camera reaches operating temperatures before using.
-
Blow gently on the lens or LCD to remove dust and dirt. Wipe gently with a soft, lint-free cloth or an untreated lens-cleaning tissue. Do not use cleaning solutions unless designed specifically for camera lenses. Do not allow chemicals, such as suntan lotion, to contact painted surfaces.
-
Service agreements may be available in your country. Contact a dealer of KODAK Products for more information.
-
For camera disposal or recycling information, contact your local authorities. In the US, go to the Electronics Industry Alliance Web site at www.eiae.org or Kodak at www.kodak.com/go/support.
Previous Next