KODAK EASYSHARE MAX Camera / Z990 — Extended user guide
Table of Contents > Taking pictures/videos > Using Panorama in SCN mode
2 Taking pictures/videos
Using Panorama in SCN mode
Use panorama to "stitch" up to 3 pictures into a panoramic scene.
|
|
NOTE: | For best results, use a tripod. Only the panoramic picture is saved; individual pictures are not. (Exposure and white balance are set with the first picture. The flash is set to Off.) |
-
Turn the Mode dial to SCN.
-
Press to choose Panorama Left-Right or Panorama Right-Left (depending on the direction you want to pan), then press OK.
-
Take the first picture.
After a quickview, the LCD displays the liveview and an "overlay" from the first picture.
-
Compose the second picture. Make the overlay from the first picture cover the same portion in the new picture.
-
If you are taking/stitching only 2 pictures, press OK to stitch them together.
After you take 3 pictures, the pictures are automatically stitched together.
NOTE: | To use the self-timer 10-second or 2-second setting, see Using the Self-timer button. |
Previous Next