KODAK ESP C315 All-in-One Printer — User's Manual
Table of Contents > Scanning > Before you begin scanning
8 Scanning
Before you begin scanning
Make sure that the printer is connected to a computer using a USB cable or wireless network (see Networking Your Printer). If you plan to scan directly from the printer control panel, you may change the scan settings as described below.
Changing the scan settings for scanning from the printer control panel
Adjust the scan settings that the printer uses before you scan from the printer control panel.
-
Open the Printer Tools window.
-
Under the Tools heading, select Printer Scan Settings.
-
Adjust settings for scanning documents and pictures:
-
To select a program that scanned images or documents will appear in when you scan from the printer control panel:
(1) Select the General tab.
(2) Under the Program List heading, click next to the currently selected program.
(3) From the drop-down list, select the program in which you want the scanned files to open.
-
To adjust settings for scanning documents, select the Document tab, then select an option for each setting:
-
To adjust settings for scanning pictures, select the Picture tab, then select an option for each setting:
NOTE: Before you save a scanned file, you will be able to preview it in Home Center Software, crop and sharpen the image, and adjust color, if desired. On a computer with WINDOWS OS, see the Home Center Software Help (? icon) for instructions.
-
-
When you are finished making selections, click OK on the bottom right of the Printer Scan Settings window.
-
Close the Printer Tools window.
Previous Next