KODAK EASYSHARE Camera / M22 — Extended user guide


Table of Contents > Install software, then share > Printing pictures

6 Install software, then share

Printing pictures

Direct printing with a KODAK All-in-One Printer

IMPORTANT: To print using PICTBRIDGE Technology, you must change the Computer Connection setting (in the Setup menu) to Other Application ( ).

You need a camera, a PICTBRIDGE enabled Printer, and a USB cable.

Connecting the camera to a KODAK All-in-One Printer

  1. Turn off the camera and printer.

  2. Connect the appropriate USB cable from the camera to the printer.

Printing from a KODAK All-in-One Printer

  1. Turn on the printer. Turn on the camera.

    The PictBridge logo is displayed, followed by the current picture and menu. (If no pictures are found, a message is displayed.) If the menu turns off, press any button to redisplay it. If the printer sees the camera as a mass storage device, turn the camera off and then back on.

  2. Choose a printing option, then press OK.

    Current Picture - Press to choose a picture.

    Tagged Pictures - If your printer is capable, print pictures that you marked for printing.

    Index Print - Print thumbnails of all pictures. (This option requires one or more sheets of paper.)

    All Pictures - Print all pictures in internal memory or on a card.

NOTE: During direct printing, pictures are not permanently transferred or saved to the printer. To transfer pictures to your computer, see Install software, transfer pictures.

Purchase cables, accessories

www.kodak.com/go/accessories

Disconnecting the camera from a KODAK All-in-One Printer

  1. Turn off the camera and printer.

  2. Disconnect the USB cable from the camera and the printer.

Ordering prints online

KODAK Gallery (www.kodakgallery.com) makes it easy to:

  • Upload your pictures.

  • Edit, enhance, and add borders to your pictures.

  • Store pictures, and share them with family and friends.

  • Have prints, photo greeting cards, frames, and albums delivered to your door.

Printing from an accessory SD or SDHC Card

  • Automatically print tagged pictures when you insert your card into a printer with an SD/SDHC Card slot. See your printer user's guide for details.

  • Make prints at an SD/SDHC Card-capable KODAK Picture Kiosk. Go to www.kodak.com/go/picturemaker.

  • Take the card to your local photo retailer for professional printing.



Previous Next