KODAK EASYSHARE TOUCH Camera / M5370 — Extended user guide
Table of Contents > Taking pictures/videos > Using Program mode
2 Taking pictures/videos
Using Program mode
The Program Scene mode gives access to the greatest number of settings.
-
Tap , then tap Scene Modes.
-
Tap Program.
NOTE: | Settings that you change in Program mode apply only to pictures taken in Program mode. Use Reset Camera ( ) to reset Program mode to its default settings. |
Changing Program mode settings
In Program Scene mode, tap a setting. Then change its value.
Using exposure compensation to adjust brightness
In Program and Panorama modes, you can adjust exposure compensation before you take a picture to make your pictures darker or lighter. (Only the first picture in Panorama mode can be adjusted—that adjustment is applied to the remaining pictures.)
-
Tap Exposure Compensation to access the exposure compensation setting.
-
Drag the slide to increase or decrease exposure compensation.
The scene in the LCD gets lighter or darker.
-
Take the picture when you are satisfied with the exposure compensation level.
Previous Next