KODAK EASYSHARE TOUCH Camera / M5370 — Extended user guide
Table of Contents > Printing pictures > Direct printing with a KODAK All-in-One Printer
7 Printing pictures
Direct printing with a KODAK All-in-One Printer
IMPORTANT: | To print using PICTBRIDGE Technology, you must change the Computer Connection setting (in the Settings menu) to Other Application ( ). |
You need a camera, a PICTBRIDGE enabled Printer, and a USB cable.
Connecting the camera to a KODAK All-in-One Printer
-
Turn off the camera and printer.
-
Use the KODAK Camera USB Cable, Micro B / 5-Pin (included with the camera) to connect the camera to the printer.
Printing from a KODAK All-in-One Printer
-
Turn on the printer. Turn on the camera.
The PictBridge logo is displayed, followed by the current picture and menu. (If no pictures are found, a message is displayed.) If the menu turns off, press any button to redisplay it.
-
Tap a printing option.
Current Picture - Tap to choose a picture.
Tagged Pictures - If your printer is capable, print pictures marked for printing.
Index Print - Print thumbnails of all pictures.
All Pictures - Print all pictures in internal memory or on a card.
NOTE: | During direct printing, pictures are not permanently transferred or saved to the printer. To transfer pictures to your computer, see Installing software, sharing. |
Purchase cables, accessories |
Previous Next