KODAK EASYSHARE Camera / Z5010 — Extended user guide

Table of Contents > Taking pictures/videos > Using exposure compensation to adjust brightness

2 Taking pictures/videos

Using exposure compensation to adjust brightness

In P and Panorama modes, you can adjust exposure compensation before you take a picture to make your pictures darker or lighter. Only the first picture in Panorama mode can be adjusted—that adjustment is applied to the remaining pictures.

Press to choose Exposure Compensation, then press OK to edit the setting. Press to change the setting, then press OK to save it.
An exposure compensation level is shown on the LCD and the image gets darker or lighter.
Take the picture when you are satisfied with the exposure compensation level.

Using exposure compensation with exposure bracketing

You can use exposure compensation in conjunction with exposure bracketing to get the best exposure.

If the exposure compensation is set to:	And if the exposure bracketing interval is set to:	Then the exposures taken are:
0.0 +1.0 –1.0	0.3 steps	–0.3, 0.0, +0.3 +0.7, +1.0, +1.3 –1.3, –1.0, –0.7

If the exposure compensation is set to:

And if the exposure bracketing interval is set to:

Then the exposures taken are:

0.0

+1.0

–1.0

0.3 steps

–0.3, 0.0, +0.3

+0.7, +1.0, +1.3

–1.3, –1.0, –0.7

Previous Next