KODAK EASYSHARE Camera / Z5010 — Extended user guide
Table of Contents > Taking pictures/videos > Using the Burst feature
2 Taking pictures/videos
Using the Burst feature
-
Press the Self-timer/Burst button until the burst icon is displayed on the LCD.
-
Press the Shutter button halfway to focus and set exposure, then press and hold it completely down to take the pictures.
The camera stops taking pictures when you release the Shutter button, when the pictures are taken, or when there is no more storage space. The flash is disabled in Burst mode. During quickview, you can delete all pictures in the burst series.
Capture mode | Picture Size (MP) | Burst rate (fps) | Burst depth (pictures) |
---|---|---|---|
Smart Capture |
14 |
0.8 |
8 |
12 |
0.8 |
9 |
|
10 |
0.9 |
10 |
|
6 |
0.9 |
17 |
|
3 |
1.0 |
31 |
|
P or M |
14 |
0.9 |
8 |
12 |
1.0 |
9 |
|
10 |
1.0 |
10 |
|
6 |
1.0 |
17 |
|
3 |
1.0 |
31 |
Example: When the camera is in Smart Capture mode and the Picture Size is set to 10 MP, you can take approximately 10 pictures at 0.9 fps (frames per second).
Previous Next