KODAK EASYSHARE P87 Digital Frame — Extended user guide

Frame does not turn on.

• Make sure the power cable that was included with your frame is connected securely (Attaching the power cable).

• Unplug the power cable for 5 seconds, then reconnect the cable. Press and hold the power button (for about 2 seconds), then release.

Nothing happens when a memory card or USB device is connected.

• Insert a certified memory card, with images, into the card slot, then push to seat it (Inserting a memory card).

• Make sure the USB device is connected securely (Inserting a USB device).

• Make sure the file format of your pictures and videos are supported (Digital frame specifications).

Frame freezes up or doesn't work properly.

• Unplug the power cable for 5 seconds, then reconnect the cable. Press and hold the power button (for about 2 seconds), then release.

• Reset the frame. On the back of the frame, press the mode and power buttons (Product views) at the same time. Highlight a reset option, then press OK.

  • Just reset—reset and save all pictures on the frame.

  • Reset and delete all pictures—reformat the internal memory and delete all pictures on the frame.

  • Return to slide show without doing anything

You set automatic on/off but the frame doesn't turn on and off at the specified times.

If your frame loses power, the clock returns to the factory setting and auto on/off times are disabled. See Re-setting your frame after losing power.