KODAK EASYSHARE Camera / M23 — Extended user guide


Table of Contents > Install software, then share > Install software, transfer pictures

6 Install software, then share

Install software, transfer pictures

Install KODAK Software—so it's easy to transfer and share pictures and videos.

IMPORTANT: To use the sharing and social networking features, you must install the KODAK Share Button App. For help using the software, go to www.kodak.com/go/support.

Make sure the computer is connected to the Internet. When you connect the camera to the computer, the KODAK Camera Setup App automatically runs. Follow the prompts to install the KODAK Share Button App.


  1. Turn off the camera.

  2. Use the KODAK Camera USB Cable, Micro B / 5-Pin to connect the camera to the computer. (Use only the cable included with this camera.)

  3. Turn on the camera.

  4. After the software is installed, follow the prompts to transfer pictures and videos to your computer.

IMPORTANT: If the installer does not run, download and install the right version for your computer's operating system: www.kodak.com/go/camerasw


NOTE: You can also use a card reader to transfer pictures/videos.

Get Software help

www.kodak.com/go/support

Download the Share Button App

www.kodak.com/go/camerasw



Previous Next