KODAK EASYSHARE Camera / Z5120 — User guide

Table of Contents > Setting up your camera > Storing pictures on an SD/SDHC Card

---

1 Setting up your camera

Storing pictures on an SD/SDHC Card

Your camera has enough internal memory for a couple practice pictures. We highly recommend purchasing a Class 4 or higher SD/SDHC Card (up to 32 GB) to conveniently store more pictures/videos. (Card class is typically shown on the card and/or packaging.)

NOTE:

Your camera also accepts EYE-FI Cards (type X2). To learn more, go to www.eye.fi.

CAUTION: A card can only be inserted one way; forcing it may cause damage. Inserting or removing a card while the camera is on may damage the pictures, the card, or the camera.

		1. Turn off the camera, then open the door.
		2. Insert a card until it clicks into place. To remove a card, press and release it. IMPORTANT: When you turn on the camera, it checks to see if a card is inserted. If pictures/videos are detected in internal memory, the camera prompts you to move them to the card. New pictures/videos are stored on the card.

Purchase memory cards

www.kodak.com/go/accessories

Previous Next