KODAK EASYSHARE Camera / Z5120 — User guide
Table of Contents > Installing the Share Button App > Installing the software
2 Installing the Share Button App
Installing the software
|
|
|
|
|
1.
Make sure the computer is connected to the Internet.
|
|||
|
2.
Turn off the camera.
|
|||
|
3.
Using the USB cable, connect the camera to a computer USB port.
The camera turns on. The Camera Setup App runs. (If there are many pictures/videos on your memory card, this step could take several minutes.) |
|||
|
4.
Watch your computer—when the Camera Setup App prompts you, click Install Now. (If you are prompted to allow the Camera Setup App to run, click Allow.)
|
||
|
5.
When prompted, click Finish.
|
|||
If you successfully installed the software Setting up the Share Button App (one-time setup)
If installation does not begin after several minutes:
-
Make sure the computer is connected to the Internet.
-
Open My Computer. (For MAC OS, go to the Finder.)
-
Open the KODAK Setup App. (For MAC OS, open the KODAK Camera Setup App.)
If the installation still doesn't begin
-
Download the Share Button App from www.kodak.com/go/camerasw.
-
After the Share Button App is downloaded, double-click to install it.
Previous Next