KODAK EASYSHARE LS443 Zoom Digital Camera — User's Guide

Table of Contents > Getting Started > Setting the Date and Time

---

1 Getting Started

Setting the Date and Time

The Date & Time screen is displayed the first time you turn on the camera or if the battery is removed for more than 10 minutes. If this is the first time the camera has been turned on, go to Step 3.

To set the date and time after that:

		1. Turn on the camera, then press the Menu button.
		2. Move the joystick to highlight Setup, then press the OK button.
		3. Move the joystick to highlight Date & Time, then press the OK button. The date format is YYYY/MM/DD. The time is displayed in a 24-hour format.
		4. Move the joystick to adjust the date and time. Move the joystick to advance to the next setting.
		5. When finished, press the OK button.
		6. Press the Menu button to exit the menu. The setting remains until you change it.

NOTE:

Depending on your computer operating system, KODAK EASYSHARE Software may allow your computer to automatically update the camera clock when you connect the camera. See the KODAK EASYSHARE Software Help for details.

Previous Next