KODAK EASYSHARE LS443 Zoom Digital Camera — User's Guide

Table of Contents > Getting Started > Turning On the Camera

1 Getting Started

Turning On the Camera


			Turn the Mode dial from Off to any other position. The Power light glows green. The ready light blinks while the camera performs a self-check, then glows green when the camera is ready to take pictures (or videos, if the mode dial is set to ). In Still and Video modes, a status bar appears on the LCD.

Adjusting the Display

To	Do This
Turn Liveview on so that the LCD can be used as a viewfinder	Press the OK button. To turn it off, press the OK button again.
Change the Liveview setting so that it is on whenever the camera is on	See Turning On Liveview in Still Modes.
Turn the status bar back on after it times out	Move the joystick .
Turn off the camera	Turn the Mode dial to Off. The camera completes operations that are in process.

Previous Next