KODAK EASYSHARE LS443 Zoom Digital Camera — User's Guide
Table of Contents > Reviewing Pictures and Videos > Running a Slide Show
4 Reviewing Pictures and Videos
Running a Slide Show
Use the Slide Show to display your pictures and videos on the LCD. To run a slide show on a television or on any external device, see Displaying Pictures and Videos on a Television.
Starting the Slide Show
|
|
|
|
|
1.
Press the Review button, then press the Menu button.
|
|||
|
2.
Move the joystick
 to highlight Slide Show  , then press the OK button. |
|||
|
3.
Move the joystick
 to highlight Begin Show, then press the OK button. Each picture and video is displayed once, in the order in which you took them. Then the camera returns to the Menu screen. |
||
|
4.
To cancel the Slide Show, press the OK button.
|
|||
Changing the Slide Show Display Interval
The default interval setting displays each picture for 5 seconds. You can increase the display interval to up to 60 seconds.
|
|
|
|
|
|
1.
On the Slide Show menu, move the joystick
 to highlight Interval, then press the OK button. |
||
|
2.
Select a display interval.
To scroll through the seconds quickly, press and hold  . |
|||
|
3.
Press the OK button.
The interval setting remains until you change it. |
|||
Turning On Slide Show Loop
When you turn on Loop, the slide show is continuously repeated.
|
|
|
|
|
|
1.
On the Slide Show menu, move the joystick
 to highlight Loop, then press the OK button. |
||
|
2.
Move the joystick
 to highlight On, then press the OK button. When you start a slide show, it repeats until you cancel it by pressing the OK button or until battery power is exhausted. The Loop setting remains until you change it. |
|||
Displaying Pictures and Videos on a Television
You can display pictures and videos on a television, computer monitor, or any device equipped with a video input. (Images may not look as good on a television as on a computer monitor or when printed.)
| NOTE: | Ensure that the Video Out setting is correctly set to NTSC or PAL (Setting Video Out). |
|
|
|
|
|
|
1.
Connect the audio/video cable from the camera video-out port to the television video-in port. (Refer to your television User's Guide for details.)
The camera LCD turns off; the television screen acts as the camera display. |
||
|
2.
Review pictures and videos on the television screen.
|
|||
| NOTE: | If you connect or disconnect the audio/video cable while a slide show is running, the slide show stops. |
Previous Next