KODAK EASYSHARE DX4330 Zoom Digital Camera — User's Guide

Table of Contents > Using the Optional EASYSHARE Camera Dock II > Installing the Camera Insert

---

9 Using the Optional EASYSHARE Camera Dock II

Installing the Camera Insert

KODAK EASYSHARE digital cameras are packaged with a custom camera insert, which is used to fit the camera to the Camera Dock.

		1. Place the front tabs on the custom insert into the slots in the Camera Dock cavity.
		2. Fit the insert down into the cavity and snap the insert into place.

If You Do Not Have the Custom Insert

If you do not have the custom insert that was included with your camera, use the universal insert that is included with the Camera Dock II.

NOTE:

The universal insert works with all KODAK EASYSHARE cameras. However, it may not match the perfect fit that the custom camera insert provides. Take extra care when placing the camera in the Camera Dock so that the dock connector and pins are not damaged.

Order a custom camera insert at
http://www.kodak.com/go/accessories.

Previous Next