KODAK EASYSHARE DX4330 Zoom Digital Camera — User's Guide

Table of Contents > Using the Optional EASYSHARE Camera Dock II > Connecting the Camera Dock

---

9 Using the Optional EASYSHARE Camera Dock II

Connecting the Camera Dock

After the KODAK EASYSHARE Software is loaded (see WINDOWS System Requirements ), connect the Camera Dock to your computer and to an external power source. You need:

• The USB cable included with your camera

• The AC power adapter, 7V included with the Camera Dock

IMPORTANT:

Make sure your camera is NOT in the Camera Dock when you are connecting to power and the computer.

		1. Plug the labeled end of the USB cable into the labeled USB port on your computer. See your computer User's Guide for details.
		2. Plug the other end of the USB cable into the square USB connector on the back of the Camera Dock.
		3. Plug the 7V AC adapter into the round power connector on the back of the Camera Dock and into a power outlet. Your AC adapter may be different from the one pictured or may have additional plugs. Use the plug that accommodates your type of power outlet. Leave the Camera Dock connected to the computer for easy transferring of pictures and videos and for charging the Battery Pack.

IMPORTANT:

Use only the 7V AC adapter included with the Camera Dock. Other adapters may cause damage to your camera, Camera Dock, or computer.

Previous Next