Kodak EasyShare DX6340 zoom digital camera — User's Guide
Table of Contents > Taking Pictures > Using the Flash
2 Taking Pictures
Using the Flash
Use the flash when you take pictures at night, indoors, or outdoors in heavy shadows. The flash setting can be changed in any Still mode. The default flash setting is restored when you exit the mode or turn off the camera, except in PAS mode (see Flash Settings In Each Mode).
|
Wide Angle |
1.6-19.4 ft (0.5-5.9 m) |
|
Telephoto |
2.5-8.9 ft (0.75-2.7 m) |
Turning On the Flash
|
|
|
|
|
Press the  button repeatedly to scroll through the flash options. |
||
The active flash icon is displayed in the camera screen status area (Camera Screen Icons).
|
|||
Auto Flash—flash fires when the lighting conditions require it. 
Off—flash never fires. 
Fill—flash fires every time you take a picture, regardless of the lighting conditions. 
Red-eye—flash fires once so the subject's eyes become accustomed to the flash, then fires again when the picture is taken. (If the lighting conditions require flash but do not require Red-eye reduction, the flash may fire only once.) Flash Settings In Each Mode
For the best possible pictures, flash settings are pre-set for each picture taking mode.
|
Icon |
Capture Mode |
Default Flash Setting |
Available Flash Settings (press the Flash button to change) |
To Return to the Default Flash Setting: |
|
|
Auto |
Auto* |
Auto, Flash Off, Fill Flash, Red-eye |
Exit the mode or turn off the camera. |
|
|
Sport |
Auto |
||
|
|
Portrait |
Auto* |
||
|
|
Night |
Auto* |
||
|
|
Landscape |
Off |
||
|
|
Long Time Exposure |
Off |
||
|
|
Close-up |
Off |
||
|
|
PAS |
Auto |
Reset manual options (Resetting Manual Settings to Defaults). |
|
|
|
Video |
Off |
None |
Flash cannot be turned on. |
|
|
Burst |
Off |
* In these modes, when you change to Red-eye, it remains until you change it.
Previous Next