Kodak EasyShare DX6340 zoom digital camera — User's Guide

Table of Contents > Customizing Your Camera Settings > Turning On Liveview in Still Modes

---

6 Customizing Your Camera Settings

Turning On Liveview in Still Modes

The Liveview feature lets you use the camera screen as a viewfinder (see Liveview—Framing with the Camera Screen). The default setting is Liveview Off. You must press the OK button to turn it on.

IMPORTANT:

Liveview quickly depletes battery power; use it sparingly.

To change the Liveview default to On:

1. Press the Menu button.
2. Press to highlight Setup , then press the OK button.
3. Press to highlight Liveview , then press the OK button.
		4. Press to highlight On, then press the OK button. Liveview is now On by default. The camera screen is on whenever the camera is on (in Still or Video mode). You can still press the OK button to turn Liveview off and on.
		5. Press the Menu button to exit the menu. This setting remains until you change it.

Previous Next