Kodak EasyShare DX4530 zoom digital camera — User's Guide
Table of Contents > Getting Started > Loading the Battery
1 Getting Started
Loading the Battery
|
1.
Turn the Mode dial to Off.
|
||
2.
On the bottom of the camera, slide the battery door and lift to open.
|
|||
|
3.
Insert the CRV3 battery as shown.
|
||
4.
Close the battery door.
Important Battery Information The CRV3 battery is not rechargeable. For acceptable battery life, and to make sure your camera operates dependably, do not use alkaline batteries.
|
See Important Battery Information for other types of batteries you can use in your camera.
If you purchased the Kodak EasyShare camera dock II, see Installing the Battery in the Camera for details on installing the Kodak EasyShare Ni-MH rechargeable battery.
See Optional AC Adapter for information on the optional Kodak 3-volt digital camera AC adapter.
Previous Next