Kodak EasyShare DX4530 zoom digital camera — User's Guide

9 Using the Optional Camera Dock II

Connecting the Camera Dock

After the Kodak EasyShare software is loaded (see Installing the Software), connect the camera dock to your computer and to an external power source. You need:

• The USB cable included with your camera

• The AC power adapter, 7V included with the camera dock

CAUTION: Use only the 7V AC adapter included with the camera dock. Other adapters may cause damage to your camera, camera dock, or computer. Make sure the camera is not in the camera dock when connecting the dock to power and to the computer. Do not plug the 7V adapter into the camera.

		1. Plug the labeled end of the USB cable into the labeled USB port on your computer. See your computer User's Guide for details.
		2. Plug the other end of the USB cable into the square USB connector on the back of the camera dock.
		3. Plug the 7V AC adapter into the round power connector on the back of the camera dock and into a power outlet. Your AC adapter may be different from the one pictured or may have additional plugs. Use the plug that accommodates your type of power outlet. Leave the camera dock connected to the computer for easy transferring of pictures and videos and for charging the battery.