Kodak EasyShare DX4530 zoom digital camera — User's Guide


Table of Contents > Using the Optional Camera Dock II > Charging the Battery

9 Using the Optional Camera Dock II

Charging the Battery

The battery is not charged when you receive it.

  1. Turn off the camera.

  2. Make sure the battery is installed in the camera (see Installing the Battery in the Camera).

  3. Place the camera in the camera dock (see Docking the Camera).

    • Charging begins immediately.

    • The three green charging lights monitor the charging status:

    • Full charging takes about 2.5 hours. After the battery is fully charged, leave the camera in the camera dock to maintain the full charge.

    • Charging stops if you turn on the camera. If the camera is left in the camera dock with the power on, charging resumes when the camera enters Auto Power-off (see Power-Saving Features).

NOTE: The camera dock only charges the provided Kodak EasyShare Ni-MH rechargeable battery. If you place the camera in the camera dock with any other type of batteries, rechargeable or not, no charging takes place. For further Troubleshooting information, see Troubleshooting.



Previous Next