Kodak EasyShare DX6490 zoom digital camera — User's Guide
Table of Contents > Taking Videos > Putting Yourself in the Video
3 Taking Videos
Putting Yourself in the Video
The Self Timer creates a 10-second delay between the time you press the Shutter button and the time video recording begins.
|
1.
Turn the Mode dial to Video , then press the Self Timer button.
The Self Timer icon appears in the status area and blinks during the timer countdown. |
||
2.
Place the camera on a flat surface or use a tripod.
|
|||
3.
Compose the scene. Press the Shutter button completely down and release it. Move so that you are in the scene.
|
|||
4.
To stop recording, press the Shutter button again.
|
-
The Self Timer light blinks slowly for 8 seconds (then quickly for 2 seconds) before the video begins recording. It stays on while recording.
-
The Self Timer turns off after you take the video or if you change modes.
-
To cancel the Self Timer countdown before the video is taken, press the Self Timer button. (The Self Timer setting remains active.)
-
To turn off the Self Timer, press the Self Timer button twice.
TIP: Want to be in the video without filming yourself walking in and out of the scene? Use the Self Timer and Video Length (see Setting Video Length) features.
Previous Next