Kodak EasyShare CX7300 digital camera — User's Guide


Table of Contents > Getting started > Setting the date and time

1 Getting started

Setting the date and time

Setting the date & time, first time

The Date & Time have been reset message appears after the Language screen the first time you turn on the camera. It may also appear if the batteries are removed for an extended time.

  1. SET DATE & TIME is highlighted. Press the OK button.

    (Select CANCEL to set the date and time at a later time.)

  2. Go to Step 4 below, Setting the date & time, anytime.

Setting the date & time, anytime

  1. In any mode, press the Menu button.

  2. Press to highlight Setup Menu , then press the OK button.

  3. Highlight Date & Time, then press the OK button.

  4. Press to adjust the date and time. Press to advance to the next setting.

  5. When finished, press the OK button.

  6. Press the Menu button to exit.

NOTE: Depending on your computer operating system, Kodak EasyShare software may update the camera clock when you connect the camera. See the Kodak EasyShare software Help for details.



Previous Next