Kodak EasyShare CX7430 zoom digital camera — User's guide

Table of Contents > Getting started > Setting the date and time

1 Getting started

Setting the date and time

Setting the date & time, first time

The Date and Time have been reset message appears the first time you turn on the camera or if the battery is removed for an extended time.

  1. SET DATE & TIME is highlighted. Press the OK button.

    (Select Cancel to set the date and time at a later time.)

  2. Go to step 4 below, Setting the date & time, anytime.

Setting the date & time, anytime

  1. Turn on the camera. Press the Menu button.

  2. Press to highlight Setup Menu, then press the OK button.

  3. Press to highlight Date & Time , then press the OK button.

  4. Press to adjust the date and time. Press to advance to the next setting.

  5. When finished, press the OK button.

  6. Press the Menu button to exit the menu.

NOTE: Depending on your computer operating system, Kodak EasyShare software may let your computer update the camera clock when you connect the camera. See the EasyShare software Help for details.

Previous Next