Kodak EasyShare printer dock plus series 3 — User's Guide

Table of Contents > Getting started > Loading paper

---

1 Getting started

Loading paper

1. Remove the paper tray from the printer dock if installed (see Installing and removing the paper tray).
		2. From the closed position, slide the paper tray cover back, about 3 in. (8 cm) to the second "click". This is the fully open, or paper loading position.
		3. Carefully "fan" the paper to keep the sheets from sticking together. IMPORTANT: Do not load more than 25 sheets of paper. Use the upper limit line inside the paper tray as a guide to prevent overloading. Do not load paper that is missing perforated tabs.
		4. Load the paper into the paper tray, with the Kodak logo side facing down.

Previous Next