Kodak EasyShare printer dock plus series 3 — User's Guide


Table of Contents > Printing without a computer > Printing from the internal card reader

3 Printing without a computer

Printing from the internal card reader

Use the built-in card slot to print pictures directly from your SDIO, SD, or MMC memory card.

  1. Open the accessory door on the printer dock.

IMPORTANT: Insert the card only as shown. Do not force the card into the card slot. Do not insert or remove a card when the printer dock is transferring pictures (see Transferring pictures from your digital camera) or if the card slot light is blinking.


  2. Orient the SDIO, SD, or MMC card as shown, then push the card into the card slot to seat the connector.

  • To print the current picture, press the Print button, .

    NOTE: If the memory card contains pictures tagged for printing, instead of printing the current picture, all tagged pictures are printed (see Printing tagged pictures).

    IMPORTANT: To avoid paper misfeeds or jams, wait until printing is complete before removing paper, the paper tray, the color cartridge, or the camera.

  • To exit without printing, press the Cancel button, .

  • To remove the card, push it in, then release it. When the card is partially ejected, pull it out.

Purchase an SD or MMC card and other accessories at a retailer of Kodak products, or visit www.kodak.com/go/accessories.



Previous Next