Kodak EasyShare printer dock plus series 3 — User's Guide


Table of Contents > Printing without a computer > Printing from a Kodak card reader

3 Printing without a computer

Printing from a Kodak card reader

Your printer dock is compatible with the Kodak 8-in-1 card reader (sold separately). Other Kodak USB card readers may work with your printer dock; however, other manufacturers' card readers are not supported.

  1. Open the accessory door on the printer dock.


  2. Plug the USB connector from the card reader into the USB device connector located on the side of the printer dock.

  3. Insert the memory card into the card reader (see your card reader user's guide for details). Do not insert more than one card at a time.

  • To print the current picture, press the Print button, .

    NOTE: If the memory card contains pictures tagged for printing, instead of printing the current picture, all tagged pictures are printed (see Printing tagged pictures).

    IMPORTANT: To avoid paper misfeeds or jams, wait until printing is complete before removing paper, the paper tray, the color cartridge, or the camera.

  • To exit without printing, press the Cancel button, .

Purchase a Kodak card reader and other accessories at a retailer of Kodak products, or visit www.kodak.com/go/accessories.



Previous Next