Kodak EasyShare V570 dual lens digital camera — User's guide


Table of Contents > Taking pictures and videos > Taking a picture

2 Taking pictures and videos

Taking a picture

Taking a video

Reviewing the picture/video just taken

After you take a picture or video, the LCD displays a quickview for approximately 5 seconds. The picture/video is saved unless you press the Delete button.

To view pictures and videos anytime, see Reviewing pictures and videos.

Understanding the blur warning icons

A picture blur warning icon is displayed during quickview and review.

Green - Picture is sharp enough for an acceptable 4 x 6-inch (10 x 15 cm) print.

Yellow - Picture may be sharp enough for an acceptable 4 x 6-inch (10 x 15 cm) print or sharpness is not determined. (You may want to view on a computer monitor before printing.)

Red - Picture is not sharp enough for an acceptable 4 x 6-inch (10 x 15 cm) print.

White - Print sharpness is still being determined.

To turn off the blur warning feature, see .

Understanding the picture-taking icons

In capture mode—no buttons pressed


In capture mode—shutter pressed halfway


Using the auto-focus framing marks (pictures)

Framing marks indicate the camera focus area. The camera attempts to focus on foreground subjects, even if the subjects are not centered in the scene.

  1. Press the Shutter button halfway.

    When the framing marks turn green, focus is accomplished.

    Center focus

    Center wide focus

    Side focus

    Center and side focus

    Left and right focus

  2. If the camera is not focusing on the desired subject (or if the framing marks disappear), release the Shutter button and recompose the scene.

  3. Press the Shutter button completely down to take the picture.

NOTE: Framing marks do not appear in Landscape, Video, or some Scene modes (Landscape, Night Landscape, Fireworks), or when in the ultra-wide zoom range. When you use Focus Zone and set Center Zone, the framing marks are fixed at Center Wide.



Previous Next