Kodak EasyShare C875 zoom digital camera — User's guide


Table of Contents > Troubleshooting > Camera ready-light status

5 Troubleshooting

Camera ready-light status

Status

Possible solution

Does not turn on and the camera does not work

  • Turn on the camera.

  • Recharge the battery or install a new one.

  • Mode dial was on when batteries were reloaded. Turn Mode dial off, then back on.

Glows steady green

  • Shutter button is pressed halfway down. Focus and exposure are set. Camera is operating normally.

Blinks green

  • Picture is being processed and saved to the camera. Camera is operating normally.

  • Camera operating normally at power up. Take pictures when the blinking stops.

  • Camera is connected to computer, USB connection is active.

  • Video is recording.

  • Self-timer is counting down.

  • Camera is powering off.

Blinks red and/or camera turns off

  • Turn on the camera.

  • Recharge the battery or install a new one.

  • Auto exposure or auto-focus are not set. Release the Shutter button and recompose the picture.

Blinks amber

  • Flash is not charged. Wait. Resume picture-taking when the light stops blinking and turns off.

Glows steady red

  • Camera's internal memory or card is full. Transfer pictures to the computer, delete pictures from camera, switch image-storage locations, or insert card with available memory.

  • Camera processing memory is full. Wait. Resume picture-taking when the light turns off.

  • Card is read-only. Change image storage location to internal memory, or use a different card.

  • The Mode dial is set to Favorites. Camera is operating normally.



Previous Next