Kodak EasyShare Z712 IS zoom digital camera — User's guide
Table of Contents > Working with pictures/videos > Running a slide show
3 Working with pictures/videos
Running a slide show
Use the Slide Show to display your pictures and videos on the camera. To run a slide show on a television or on any external device, see Displaying pictures and videos on a television. To save battery power, use an optional Kodak 3-volt AC adapter. (Visit www.kodak.com/go/z712accessories.)
Starting the slide show
-
Press the Review button, then press the Menu button.
-
Press
to highlight Slide Show, then press OK. -
Press
to highlight Begin Show, then press OK.
To interrupt the Slide Show, press OK.
Changing the slide show display interval
The default interval setting displays each picture for 5 seconds. You can set the display interval from 3 to 60 seconds.
-
On the Slide Show menu, press
to highlight Interval, then press OK. -
Select a display interval.
To scroll through the seconds quickly, press and hold
. -
Press OK.
The interval setting remains until you change it.
Running a continuous slide show loop
When you turn on Loop, the slide show is continuously repeated.
-
On the Slide Show menu, press
to highlight Loop, then press OK. -
Press
to highlight On, then press OK. -
Press
The slide show repeats until you press OK or until battery power is exhausted. The Loop feature remains until you change it.
to highlight Begin Show, then press OK.
Displaying pictures and videos on a television
You can display pictures/videos on a television, computer monitor, or any device equipped with a video input. To connect the camera to a television, use an optional A/V cable (visit www.kodak.com/go/z712accessories).
| NOTE: | Ensure that the Video Out setting (NTSC or PAL) is correct (
). The slide show stops if you connect or disconnect the cable while the slide show is running. (Image quality on a television screen may not be as good as on a computer monitor or when printed.) |
Previous Next