Kodak ESP 9 All-in-One Printer — User Guide
Table of Contents > Copying > Adjusting copy settings
6 Copying
Adjusting copy settings
You can change the default copy document settings for your printer using the control panel. Depending on whether you are copying a photo or a document, select the appropriate option submenu from the main menu.
-
From the control panel, press Menu.
-
Copy Document is the first option. As needed, press to select Copy Photo.
-
Press OK to display the Copy Document Options (or Copy Photo Options) menu.
-
You can press until the option you want to adjust is selected. If a value is displayed between the and symbols in the row, press or to select the value you want.
-
Any changes you make to the copy settings apply only to the current copy operation unless you save them as your default settings. To keep the settings as permanent, press until Save as Defaults is selected; press OK, and then select Yes and press OK to save the change(s) as the new default settings.
-
Press Start to initiate copying the document (or photo).
The available copy settings are shown in the table below:
Copy Document options
Menu Options | View Settings / Select | Settings |
---|---|---|
Quantity |
or |
1- 99 |
Copy Size a |
or |
Same size |
20%–500% |
||
Photo Paper Quality |
|
Automatic |
Plain Paper Quality b |
or |
Normal |
Best |
||
Draft |
||
Color |
or |
Color |
Black & White |
||
Brightness |
or |
-3 to +3 |
Save As Defaults |
OK |
|
a Scaling is anchored to the upper left corner of the original.
The copy is the same size as the original. Cropping occurs if the original is larger than the paper size. The copy will contain white space if the original is smaller than the paper size. Same Size is the default copy setting. |
|
Press or to set the scaling for your image. |
b Plain paper quality output:
Produces the fastest print speed, but the lowest quality. |
|
Delivers high-quality output and is the default setting. Normal prints faster than Best. |
|
Produces the highest quality for all paper and eliminates the banding (striping) effect that sometimes occurs in Draft and Normal modes. Best is the slowest print speed. If Kodak photo paper is loaded in the paper tray, this setting is used. |
Copy Photo options
Menu Options | View Settings / Select | Settings |
---|---|---|
Quantity |
or |
1- 99 |
Copy Size |
or |
4x6 |
4x7 (High Def) |
||
4x12 (Panoramic) |
||
5x7 |
||
8x10 |
||
8.5x11 |
||
(Wallet) 2x3 |
||
Photo Paper Quality a |
|
Automatic |
Plain Paper Quality a |
or |
Normal |
Best |
||
Draft |
||
Color |
or |
Color |
Black & White |
||
Brightness |
or |
-3 to +3 |
Preview |
or |
No |
Yes |
||
Save As Defaults |
OK |
|
a You need to specify a quality only for plain paper. If photo paper is loaded in the paper tray, the printer will output the best available quality using the Automatic setting. To review the settings for plain paper copying, see "Plain Paper Quality" under Copy Document options.
Previous Next